5.09.2008

Looking at Areas of Concern in a Home Inspection


So the home seller has accepted your offer, and you've scheduled a home inspection. If the inspector raises any doubts about a big-ticket item, such as the condition of the roof or furnace, or if she recommends additional tests or inspections, you'll need to schedule follow-up inspections. For example, if the furnace is old, call in a heating and air-conditioning contractor to inspect it more thoroughly. The cost of repairs to any of these items varies depending on the nature of the problem and material and labor costs in your area.


Areas of concern regarding a home inspection often include the following:

Foundation: The entire house rests on the foundation. If it shows signs of water damage or serious settling, have it professionally inspected. Fixing the problem may be a simple matter of repairing the gutters to direct more water away from the foundation (inexpensive) to jacking up the house and pouring a new foundation (extremely expensive).
Electrical system: If the home inspector points out any concerns about the electrical system, have a licensed electrician inspect it. An electrician can tell you whether the system is up to code and, if it's not, provide an estimate on the cost to bring it up to code.
Plumbing and septic: A home inspector typically checks the plumbing to ensure that the water pressure is sufficient, nothing is leaking, and drains are freely flowing. If the plumbing appears to be substandard, have a licensed plumber inspect it. If the septic system is over 10 years old, have that inspected, as well.
Aging, big-ticket items, including furnace, A/C, and roof: If something is old but working, don't assume it's okay. Have a licensed contractor check it out. Even if a furnace is heating the house, it may be leaking carbon monoxide or have other problems that the inspector doesn't notice.
Attic and insulation: Make sure that the inspector checks the attic. Does it have sufficient insulation? Does the insulation contain asbestos? Does the underside of the roof show any signs of damage or leaking?
Grading: Does the ground slope down away from the house as it should? Poor grading can funnel water right into the home's foundation and is costly to fix.
Lead-based paint: In some homes built before 1978 and many homes built before 1960, lead-based paint may be present. You can pick up a test kit at your local hardware store to test for lead. In some cases, correcting this problem can be cost-prohibitive — because you must disclose the presence of lead-based paint on your Seller's Disclosure document, it can drive a lot of potential buyers away.
Asbestos: Commonly used to insulate furnaces and water pipes, asbestos is a health hazard that's costly to deal with. If it turns up in a home inspection, obtain a couple of estimates on having it removed, and then calculate that into your rehab costs.
Radon: Radon is a known cancer-causing gas that can be a problem in some areas of the country, and often requires that the foundation be sealed and vented or even completely replaced, which can cost thousands of dollars. Your local environmental protection agency can tell you if radon is a problem in your area.
Toxic mold: If the home shows any signs of moisture damage or mold stains, have it tested for toxic mold and determine the cost of eliminating the mold and its cause. The presence of toxic mold (often called black mold, even though it's not always black) is enough to kill a deal — fixing the problem can cost as much as the purchase price of the house. If you suspect mold to be a problem, call a certified mold remediation specialist for additional testing and any necessary treatment.
Lead pipes or lead in water: Some homes built before 1940 have lead pipes or copper pipes joined with lead solder. If lead is a concern, call your local water company to have the water tested. The cheap fix is to install a water filter for the drinking water. More expensive fixes call for replacing the pipes or installing a whole-house water filtration system.
The home inspector is sort of like your family doctor. She can give you a quick examination to tell whether you're generally healthy or not, but if you have any specific complaints that she's uncertain about, she refers you to a specialist. The home inspector can tell whether everything is functional, but if you or the inspector has a specific concern, consult a specialist.

5.08.2008

Garden Pests: Controlling Birds, Deer, and Other Animals


Birds, deer, and other animals can decimate the yield from your fruit and vegetable garden. You can coexist with wildlife if you protect your produce garden from pests with these methods.

Bird watch:


Polyester bird netting. Sold at most garden centers, this barrier is by far the most reliable way to protect fruits and vegetables. Drape the netting over fruit-bearing plants as soon as fruits begin to ripen.


Birdscare flash tape. This tape looks like metallic ribbon. Decorate the tops of plants with the stuff and trick birds into thinking the plant is on fire.


Fake predators. These fool-the-eye figures include artificial snakes, and owls, and good old scarecrows. Rearrange these phony spooks often to keep the birds baffled.


Noisemakers. The devices include wind chimes, bells, rattling aluminum pie pans, and other items that make sounds when bumped by birds or jostled by the wind (just use your imagination).

Animal patrol:


Deer. Deer are creatures of habit. They often travel along the same routes day after day, moving between two locations. Build a deer-excluding fence about 8 feet (2.5 meters) high (deer have been known to jump 10-foot, or 3-meter, fences). Before you invest in a fence, you may want to try surrounding your garden with a heavy fishing line attached to posts at about 3 feet (1 meter) high. This can startle deer because they don't see the fishing line, and they may retreat. This wouldn't be a method to try with young children around who could injure themselves on the line.


Deer avoid some plants, although they are notorious for changing their minds about what they want for dinner. In general, pungent or fuzzy-leafed plants are safe.


Gophers. These are burrowing, antisocial rodents that can carve out 700 square yards (585 square meters)of elaborate underground tunnels. While they tunnel, they work up quite an appetite and any plant roots that happen to be in the way turn into lunch.


Underground barriers made of hardware cloth are effective. Install barriers at least 2 feet (60 cm) deep to block their borrowing.


Various traps are available to catch gophers dead or alive, and traps are the only method used by orchardists and others who are serious about limiting gopher damage. Traps work best when set inside the tunnels.


Groundhogs (woodchucks). The easiest way to eliminate groundhogs is a fence, one that extends 3 to 4 feet (1–1.2 meters) above ground and 18 (46 cm) inches below ground. Traps are next best. Groundhogs are one of the easier garden raiders to trap alive with a Havahart trap. Check with local and state ordinances about any restrictions on live trapping, and take care when releasing any wild animal so that it doesn't turn on you.

If you're at wit's end dealing with marauding deer or gophers, or woodchucks, consult your local animal control officer. Normally, you find these folks listed under the city, county, or state listings in the telephone book.

Watering Houseplants on Demand


The watering methods require that you check on your plants regularly and water them only when they need it. This is the watering on demand system and it inevitably generates the best results. Part of the watering on demand process involves the drench-and-let-dry method — water plants thoroughly, and then let them almost dry out before watering them again.

Almost dry isn't the same as dry. Ferns and other thin-leafed plants never like their potting mix to go anywhere beyond the almost-dry stage. As soon as their mix becomes dry to the touch, water them without delay. Cacti and other succulents, as well as many other thick-leafed plants, don't mind if their soil dries out. Those plants can go a few days with dry soil, or even go weeks without watering if they are in a dormant state.



Check each plant every three to four days and water only those plants that need it.

If you use the watering on demand routine, you probably discover that you tend to water the following plants more often than others:


Plants growing in clay pots


Plants with large or thin leaves


Plants with thin stems


Plants in full growth


Underpotted plants

You can also expect to water more often if any of the following environmental conditions exist:


High temperatures


Strong sunlight or other bright light


Dry air


Air movement, such as a breeze coming through a window

You probably find that you water the following plants less often than your other plants:


Plants in plastic pots


Plants with thick, waxy, or hairy leaves, or with no leaves at all


Plants with thick stems, such as you see on succulents


Weak or sick plants


Resting or dormant plants


Overpotted or freshly repotted plants

You can also expect to water less often if any of the following environmental conditions exist:


Low temperatures


Cloudy days or dim light


Humid air


Little or no air movement

Tips for Cleaning Your Houseplants


Any substance that accumulates on plant leaves creates a barrier between the leaves and their source of energy — sunlight. Not only do these by-products of daily indoor living get in the way of sunlight reaching your plants, they can also clog up a plant's breathing pores (the stomata), slowing down respiration and growth. Living plants, fortunately, are partly self-cleaning. They absorb some of the particles that otherwise become dust in your home. But they can't do this "vacuuming" all on their own. Most plants do require at least an occasional cleaning.

How often should you clean your plants?
How often you need to clean your plants depends on your growing conditions. In most homes, two or three times a year, or whenever the leaves start to look dusty, is sufficient. Plants that live in the kitchen, where cooking grease is a problem, require more frequent showers, such as every month. So do plants growing in urban areas or industrial centers that have greater amounts of air pollution.

Give your plants a shower
The way most people clean off their plants is to give them a good dusting now and again. The fact of the matter is that dusting rarely does any good. Even the softest of dusters or brushes that aren't specifically designed for cleaning plants can scratch delicate leaf surfaces. A better way to clean dust off your plants is to give them a shower.

Outdoors in humid climates, nature does much of the plant cleaning by supplying regular rain showers. If you have a yard or sidewalk, put your plants outdoors on a warm, rainy day. They come back inside clean and rejuvenated! (If you're worried about soil splashing up onto the leaves and stems, cover the potting mix with a rag before you put the plant outside.)

Another way to clean your plants is to take them outside on a gray day (but never in the hot sun) and hose them down. Use soapy water if you like because it helps dislodge the grime — just be sure to rinse your plants with fresh water afterward. Soap residues (especially if the plant is washed often) sometimes clog up stomata (breathing pores).

During the cold weather months, or if you're an apartment dweller and hauling your plants into an elevator is more trouble that it's worth, just put your plants in the bathtub, turn on the shower, make sure the water is tepid, pull the curtains, and give them a bath that way. Let the plants dry for an hour or so before moving them back to their usual place to keep them from dripping all over your floors.



Some plants, such as African violets and cyclamens, dislike rain and showers. Clean their leaves individually with a soft rag dipped in soapy water, using hand soap or mild dishwashing detergent. To keep the leaf from snapping off, slip your hand underneath it, supporting it lightly, then softly brush from the base of the leaf to its tip. Rinse out the rag often to remove grime. Let the plant dry off for an hour or so before putting it back in the light.



You may want to hand-clean plants that don't mind showers if they have stubborn stains, such as the whitish spots from pesticide often present on newly purchased plants that resist simple rinsing methods. You also can clean dusty plants by passing lightly over their leaves with a shaving brush. (Shaving brushes are the softest brushes of all and among the few that don't scratch leaves although they don't always remove grease and stubborn stains.) You can also buy fleece cleaning mitts designed specifically for grooming plants.

Steps for Fool-Proof Repotting



Ready for a little repotting? It's not that difficult even if it's your first try at repotting a plant, and if you're an old hand at it, you may discover some helpful new techniques. Before you remove a plant from its pot, always make sure that you have enough potting mix on hand, and then follow these steps:

1. A day or two before you plan to repot, give your plants a thorough watering because they're easier to repot when the growing mix is moist.

2. Pour some potting mix into a bucket or bowl and add an equivalent amount of warm water, then blend thoroughly.

Most soilless potting mixes are somewhat water repellent when dry, so you need to stir them. Aim for a consistency a little drier than muffin batter. If the mix is too dry, add more water; too liquid, add a bit more medium.Adding a drop or two of liquid soap to the water also helps the mix to absorb moisture more readily.

You can seal any leftover mix in a plastic bag or container and save it for your next potting session.

3. To remove the plant from its old pot, slip your hand over the top of the pot, holding the plant's stem between your fingers, and turn the pot upside down, as shown in Figure 1.


Figure 1: The correct technique for removing a plant from its pot.



4. Tap the rim of the pot firmly against a hard surface, such as a table, and then gently pull the pot upwards to remove the plant (again, see Figure 1).

If the plant refuses to budge, tap the pot against the hard surface a few more times and try again. It may take two pairs of hands (one pair pulling on the pot while the other pair holds the plant) to remove big plants from large pots. You also may have to run a knife blade around the inside of the pot's rim to remove the plant or first cut away roots extending from the drainage holes. If that doesn't work, you may actually have to break the pot to remove the plant.

5. Examine the root ball.

If the root ball is less healthy or if the plant has been in the same pot for more than 18 months, you must do some cleaning up before repotting it.

If some of the roots appear dead, damaged, or rotten (or circle the inside of the pot, indicating probable underpotting), you need to prune them off.

6. If thick roots totally encircle the plant, cut away a 1/2- to 1-inch (2- to 3-centimeter) slice of roots and soil with a sharp knife — not only all around the pot, but also from the bottom (see Figure 2).


Figure 2: If the root ball is entirely circled by thick roots, slice a portion of roots and soil from the sides and bottom.



Don't cut away healthy roots of plants that don't like being repotted, such as the clivia.

If you intend to repot the plant into a pot of the same size or smaller, prune back even more harshly. You can remove up to one-third of the old roots (or one-third of the root ball) without harming the plant.

7. Remove about one-third of the old potting mix from the root ball, loosening it gently with your fingers, a stake, a pencil, or a chopstick inserted straight down into the roots.

It's no loss — the soil is most likely contaminated with mineral salts.

8. Pour in a layer of the premoistened potting mix made in Step 2.

Use just enough so that the top of the roots are at the same level as the pot's rim projection.

9. Set the plant in the pot, turning it to make sure it is completely centered, and begin adding soil.

Use your fingers or a chopstick to work the potting mix down among the roots. Press just hard enough to eliminate any large air pockets without compressing the soil.

10. Add the potting medium until the roots are well covered, and then even out the mix with your fingers or a spoon.

11. Water well, let drain, and you're done!

Try to keep any newly repotted plant out of full sunlight for a week or so, and then reintroduce it to its permanent home. You can begin fertilizing again in about one month.

One important note before you actually repot the plant: Don't waste the already limited space in an average pot with a layer of useless pot shards. Use a good potting mix from top to bottom. Studies show that so-called drainage layers don't actually help drainage at all. On the contrary, pots actually drain better when the potting mix is evenly packed in the pot.

Preparing Plants for the Ride Home in Any Weather


After your new plant pal is out of the store, you have to make sure it weathers the ride home with a minimum of disturbance. The following information provides some tips for both cold-weather and warm-weather rides.

Hot weather
In hot weather, temperatures can reach as high as 170 degrees F (77 degrees C) in a car parked in bright sun, enough heat to do in the toughest plant. If you're driving home, try to keep the plant out of the hot sun by placing it on the floor of the car. If your return trip includes another stop, park the car in the shade and leave the windows open a crack. Better yet, don't stop on the way home. Make your plant purchase the last one of the day.

Cold weather
You can buy plants in any season, but in cold climates you need to take some special precautions during the winter months:


Insist on paper wrapping. It's a better insulator against cold than plastic.


If it'sreally cold out (below freezing), ask the clerk to double-bag the plant by placing the plant first in a sealed paper bag and then in a larger plastic bag. Inflate the outer bag by blowing it up, then tie it shut to trap the warm air inside.


In subfreezing weather, always heat the car before putting a plant inside. If you intend to set the plant on a cold floor or seat, put a layer of insulation between the pot and the cold surface. You also can ask the store for an extra paper bag and put that under the plant.


Never let the foliage touch a cold window.


Make sure that your plant purchase is the last stop for the day: Don't leave a plant sitting in a car that's getting colder by the minute.


If you bring a plant home by foot or by bus when temperatures drop well below freezing, you run a big risk of killing it. You don't want to have the plant outdoors any more than five minutes, even well wrapped. Why not splurge and take a taxi?

Always take adequate care of large plants in any weather. If you can't fit the plant in the cab of your vehicle, arrange for delivery in a closed truck. An open pickup simply doesn't cut it, even for well-wrapped plants.

Locating Your Water Shutoff Valves


The first rule of good plumbing maintenance is making sure that every member of your family knows the locations of the main water shutoff valve and all sink or fixture shutoff valves (shown in Figure 1):


The main valve is usually a gate valve that allows a full flow of water through the pipe when it's open. This valve is located near the water meter (or pressure tank, if you rely on well water). Turning this valve clockwise cuts off the water supply to the entire house.
Figure 1: The main water shutoff valve is usually located in the basement, close to where the water main enters the house. You can also turn off the water at shutoff valves located under each individual fixture.



Most houses have fixture shutoff valves at the toilet and at each sink. These valves let you shut off the water supply to one fixture without halting water service to other fixtures. The water shutoff valves to the kitchen sink are inside the cabinets beneath the sink; the bath lavatory valves are usually concealed in the vanity cabinet beneath the lavatory. For the toilet, the water shutoff valve may be on either side, or beneath the water closet or tank.




In the basement or crawl space, you can find water shutoff valves to the outside, or bib, faucets. Some newer houses have frost-proof bibs or faucets to the outside to prevent the faucets from freezing in winter. If you have frost-free bibs, you don't have to shut off the water at the valves inside the basement or crawl space in winter. The shutoff valve for frost-free bibs is located inside the house, at the end of a thick pipe that connects to the water supply pipe outside.


If your house doesn't have frost-free bibs, look for a shutoff valve in the pipe leading to the outside bib. During freezing weather, turn this valve off and then open the bib valve to allow the water between the shutoff valve and bib to run out.